Characteristics of polycarbonate greenhouse Harvest PC
- Posted by: Ngọc Trinh
- Category: greenhouse
The whole set for the building of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the form of rolls of 2.1 m in length and a diameter of 60-90 cm. The depth of this substance is 4 mm.
If you would like, you can boost the duration of the structure to 6 yards or longer. To try it, it is sufficient to attach a two-meter expansion. When picking a drawing, look closely at the distance between the arches. This figure should be 65 cm, that’s the most appropriate duration for the specified depth of the substance. The width of the doorways based on the manufacturer’s drawing is 90 cm.
Before assembling a polycarbonate greenhouse, it’s important to select a location because of the place. If this is done correctly, it is possible to provide yourself with a crop of fresh veggies for the entire year.
The location for the future greenhouse is marked instantly in the planning of their garden plot. In order to melt the snow in the place of their greenhouse as early as possible, the ideal point on the website is going to be a small elevation. In addition, in such a place is not going to need to be worried about higher humidity as dirt and air in the building.
Assemble a polycarbonate greenhouse on a raised site – intends to care for the best temperatures indoors.
When it isn’t possible to put a greenhouse in an elevated place, you will have to pour a layer of fine crushed stone about 20 cm and the exact same layer of fertile land to create seedbeds.
Before assembling a greenhouse in your backyard plot, it’s also wise to think about where and how this structure will be installed. First, you must choose a location for it. The greenhouse should be found at a metropolitan region no less than a few meters away from homes, barns and other structures.
How to Put in a greenhouse according to the Faces of the Planet
Make sure you measure the dirt surface – it is ideal to even remove the surface. This can also eliminate weed seeds. And for simplicity of work, eliminate the soil in a place that is about a meter wider on both sides of the rectangle you want.
It’s also gidpostroy.ru worth considering having a foundation. As manufacturers state, now most greenhouses don’t need it, especially if they (greenhouses) are employed only in the spring and summer time. But, experienced gardeners still recommend earning an elementary foundation from a bar. It’s quite simple – it’s sufficient to link with each other utilizing metal screws and corners four parts of timber with a cross-section of 10 * 10 cm. The size of such a foundation ought to be equal to the base of the upcoming greenhouse.
Simple bar foundation
You can even create a strip base of concrete. He is more dependable than a pub foundation, but demands greater financial and labor expenses. By the way, the greenhouse, that is used in the winter, with no and don’t do with it at all.
Stages of the creation of a strip foundation: a schematic representation
Many producers advise to put in greenhouse structures without even creating a foundation. Even for this use, they equip the frame with special T-shaped legs, so the structure was firmly fixed. But, as practice shows, it’s still essential to construct a base: so and the basis will be more rigorously fixed and also the components of the foundation that are in contact with the soil, will be stored much more in its original state.
The principal issue is to take care of the material with specific agents to protect the wood from moisture. The material is generally installed on concrete cubes that are dug into the soil. To get a six-meter structure, they want 10 bits: four on each side and one at the middle of the endings.
Before you perform the greenhouse , you will need to choose the perfect spot for this. It has to be an even website, so the frame was located evenly, without distortions. It needs to be bright and not obscured by buildings or trees.